← All tools

MTM comb-filtering and polar response analyzer

See where a two-woofer (MTM) center channel cancels off-axis, and how crossover frequency, slope and woofer spacing move the nulls.

MTM
Midwoofer Tweeter Midwoofer

Presets

Speaker parameters

Crossover slope 24 dB/oct

Off-axis summary

AnglePath diff1st nullNet dipStatus
15°6.6 cm2.61k-3.0 dBMild dip
30°12.7 cm1.35k-16.7 dBSevere suck-out
45°18.0 cm955-27.7 dBSevere suck-out
60°22.0 cm780-34.6 dBSevere suck-out
-30 dB-24 dB-18 dB-12 dB-6 dB0 dB1002005001k2k5k10k20kfc 2.10 kHz#1 -16.7 dB1.35k#2 -0.6 dB4.05k#3 -0.1 dB6.75k#4 -0.0 dB9.45k#5 -0.0 dB12.15k#6 -0.0 dB14.85k#7 -0.0 dB17.56k

Null breakdown at 30°

NullFrequencyWoofer atten.Net dipStatus
#11.35 kHz-1.4 dB-16.7 dBSevere suck-out
#24.05 kHz-23.4 dB-0.6 dBClean (out of band)
#36.75 kHz-40.7 dB-0.1 dBClean (out of band)
#49.45 kHz-52.3 dB-0.0 dBClean (out of band)
#512.15 kHz-61.0 dB-0.0 dBClean (out of band)
#614.85 kHz-68.0 dB-0.0 dBClean (out of band)
#717.56 kHz-73.8 dB-0.0 dBClean (out of band)

What causes comb filtering in an MTM

When two identical midwoofers play the same signal from points a few inches apart, a listener off to the side hears the nearer woofer slightly before the farther one. The difference in path length is

ΔL=dsin⁡θ\Delta L = d \sin\theta

and the woofers cancel each other wherever that difference is an odd number of half-wavelengths. The first cancellation null lands at

f1=c2 d sin⁡θf_1 = \frac{c}{2\,d\,\sin\theta}

More generally, the nulls fall at

fn=(n−12) cdsin⁡θ,n=1,2,3,…f_n = \frac{(n - \tfrac{1}{2})\,c}{d \sin\theta}, \quad n = 1, 2, 3, \dots

where dd is the woofer spacing, θ\theta the angle off the centerline and cc the speed of sound.

The crossover decides whether that null matters. If the woofers have already rolled off by the time the null arrives, the tweeter fills in and the dip is shallow. If the woofers are still playing at full level, the dip is deep.

What to try

  • Pick the Standard 2-way MTM preset and sweep the listening angle from 0° to 60°. Watch the first null move down in frequency as the angle grows.
  • Lower the crossover frequency. The woofers stop playing before the nulls arrive, and the net dip shrinks.
  • Switch to the polar plot and set the test frequency to the crossover to see the horizontal pattern at the handoff.

Assumptions and limits

This is a simplified model, not a measurement.

  • Two identical, ideal point sources. Real drivers have their own directivity and size.
  • The tweeter sits on the centerline, so it has no path difference at any horizontal angle.
  • Orders 2, 4 and 8 sum the low-pass and high-pass magnitudes (HP=1−LPHP = 1 - LP). Order 1 uses the exact first-order phase relationship.
  • Horizontal plane only. No cabinet diffraction, room reflections or vertical lobing.
  • “Severe” means a net dip deeper than 6 dB, “mild” means 2–6 dB. These thresholds are this tool’s own convention.

Use it to compare designs and understand the trend. Do not read the dB values as a prediction for a specific speaker.